Thanks:
0
Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 35
trapps
Are there any Konica Minolta techs that have lots of experience on colour 8050 and c500 machines?
-
field service supervisor
100+ Posts
- Rep Power
- 37
c500
well i dont kn ow if you would say i know them very well aS THEY HAVE THERE OWN MINE but i have spent my share of time on them.. it seems as if no two machines are alike. atleast so far. What can i help you with
-
Technician
- Rep Power
- 35
c500 and 8050 jamming and quality issues.
Thanks for your response, had one that was giving j 92-01 codes.I looked at drives, fuser exit, sensors in inverter etc.Eventually cleaned rollers on adu,m/c run for 2 to 3 weeks and problem resurfaced.Another thing on these m/cs, the quality issue with pitch lines how is that resolved, any suggestions would be appreciated.
Thanks.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks