Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: trapps

  1. #1
    Technician
    Join Date
    Mar 2007
    Location
    Sydney
    Posts
    14
    Rep Power
    27

    trapps

    Are there any Konica Minolta techs that have lots of experience on colour 8050 and c500 machines?

  2. #2
    field service supervisor 100+ Posts mikeena's Avatar
    Join Date
    Mar 2007
    Location
    sacramento, ca
    Posts
    197
    Rep Power
    0

    c500

    well i dont kn ow if you would say i know them very well aS THEY HAVE THERE OWN MINE but i have spent my share of time on them.. it seems as if no two machines are alike. atleast so far. What can i help you with

  3. #3
    Technician
    Join Date
    Mar 2007
    Location
    Sydney
    Posts
    14
    Rep Power
    27

    c500 and 8050 jamming and quality issues.

    Thanks for your response, had one that was giving j 92-01 codes.I looked at drives, fuser exit, sensors in inverter etc.Eventually cleaned rollers on adu,m/c run for 2 to 3 weeks and problem resurfaced.Another thing on these m/cs, the quality issue with pitch lines how is that resolved, any suggestions would be appreciated.
    Thanks.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here