Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    caveboy
    Guest

    Konica /Minolta c960 error code

    I just move a bizhib c350 from one location to another. Now, I am getting an error code c960 during power up and the copier doesn't work any more. Could anyone tell me what this error code means

  2. #2
    trublu
    Guest

    C0960

    C0960

    Bypass lifting motion failure

    The Bypass Lift-up Sensor is not blocked even when
    the Tray2 Vertical Transport Motor has turned for a
    given number of pulses after the sequence to move
    the Paper Lifting Plate from the standby position to the
    take-up position was started.

    The Bypass Lift-up Sensor is not unblocked even
    when the Tray2 Vertical Transport Motor has turned for
    a given number of pulses after the sequence to move
    the Paper Lifting Plate from the take-up position to the
    standby position was started

  3. #3
    Service Manager 1,000+ Posts
    Join Date
    Apr 2009
    Location
    LaPorte Indiana
    Posts
    1,054
    Rep Power
    43
    This code is usually caused by the white plastic spring clutch in the bypass unit. Sometime adjust the slot where the spring clips into will take care of it.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here