Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Technician mcbrides printing's Avatar
    Join Date
    Mar 2010
    Posts
    13
    Rep Power
    22

    Service Code 41-09 on Konica 8050

    I am getting SC 41-09 quite often. After initial startup the machine will shut down with SC-41-09 after approximately 30 minutes. I will restart and start printing and sometime it runs 30 minutes to an hour. Before I call for service, is their a sensor or filter that can be checked. Thanks John

  2. #2
    Field Supervisor 500+ Posts Luther's Avatar
    Join Date
    May 2006
    Location
    crystal lake ,Illinois
    Posts
    650
    Rep Power
    36
    polygon motor in cyan laser assembly is failing ,you are going to need a tech new laser or lube the polygon motor which i don't know if it's possible in this unit.........good luck

  3. #3
    Field Supervisor 500+ Posts
    Service Code 41-09 on Konica 8050


    Join Date
    Nov 2007
    Location
    New Jersey
    Posts
    959
    Rep Power
    43
    First turn off and unplug the machine.Take off the right side cover and then the metal plate covering the lasers. Clean out the dirt, dust and debris clogged in the heatsinks of the laser motors. Restart the machine, you should be all set.

    If not, yeah your going to need a tech.

  4. #4
    Technician mcbrides printing's Avatar
    Join Date
    Mar 2010
    Posts
    13
    Rep Power
    22
    Cleaning the dust and debris out. I did not go to deep into machine. I only took off right side cover and cleaned fins. No error codes since. Tanks for your help.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here