Thanks:
0
Likes:
0
Dislikes:
0
-
Trusted Tech
50+ Posts
- Rep Power
- 32
- Is the LS-501/FD-501/SD-501 a supported configuration?
The LS-501/FD-501/SD-501 is not a supported configuration with any of the bizhub PRO C6500 supported controllers.
TAUS0702375
- What serial number prefix is required for the SD-501 to be compatible with the bizhub PRO C6500?
The finisher must have a serial number beginning with 15AQ or later to be compatible with the bizhub PRO C6500.
TAUS0702050
- SD-501 is not being recognized by the machine.
CAUSE: Incorrect setting of the dip switches located on the rear of the SD-501 unit.
SOLUTION: Check to make sure that all 4 dipswitches are in the ON (up) position. See the attached SD-501 Installation Manual.
TAUS0702172
- bizhub PRO 1050,bizhub PRO C6500,bizhub PRO C6501,bizhub PRO C65hc,
bizhub PRO 1200/1051 options compatibilities
This is information of the old options (bizhub PRO 1050,bizhub PRO C6500 series) and the new options (bizhub PRO C6501,bizhub PRO 1200/1051 series).
The old and the new options cannot exist together with one system, though the main body can be connected with both the old and the new option.
However,PB-501 and FS-503 of bizhub PRO 1050 mainbody
are can exist together new options with one system.
TNBT0900008
check your pm
-
Trusted Tech
50+ Posts
- Rep Power
- 32
Please tell us what you finally did.
Did you find solution?
-
Answer was controller board. Serial number did not support being flashed with C6500 firmware. Order a newer unit and flashed it prefectly. Have a great 1050 book finsher if someone wants to buy.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks