Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Technician Wasfil's Avatar
    Join Date
    May 2008
    Location
    Jakarta
    Posts
    20
    Rep Power
    25

    Bizhub C203 appears C255C

    I have aproblem with C203 MFP, when i replaced an Imaging Unit Black, C255C monitor appears, this indicator refer to TCR adjustment IU Black Failure, so i change with new one, but aproblem is still appears this code. I try to used this IU to the other machine, the result is same problem occur to the other machine. help me ..Thx

  2. #2
    Field Supervisor 500+ Posts
    Bizhub C203 appears C255C

    copytechman's Avatar
    Join Date
    Nov 2008
    Location
    Barrie, Ontario
    Posts
    808
    Rep Power
    32
    Try (gently) shaking iu side to side then try again. Otherwise replace imaging unit, u may have a dud.

    Regards!
    A.

  3. #3
    Technician Jumping Jack Flash's Avatar
    Join Date
    Jul 2009
    Posts
    35
    Rep Power
    0
    My suggestions are:
    1st Install the chip in the old module with the new BK IU and turn on the machine several times.
    2nd If the chip with the launch of a new module in the old UI that means that the machinery put the correct value of the TCR.
    3rd You can now unlock the chip with the correct value to insert into the new UI.
    4th If this fails, use the device to enter the correct value to the TCR to the chip from the new module.

    Please View
    TCR solution..JPGTCR solution 1..JPG

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here