Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Senior Tech 100+ Posts tech9's Avatar
    Join Date
    Apr 2009
    Location
    london
    Posts
    219
    Rep Power
    33

    Konica Minolta Bizhub 350

    Hi there i am not familar with this box do mainly xerox can any one point me in the right direction ? Konica Minolta Bizhub 350
    PROBLEM: fault code c- 0f32

  2. #2
    albasoul06
    Guest
    COF32 is displayed

    CAUSE: Poor connection between the imaging unit contacts and the machine. Defective ATDC sensor.
    SOLUTION:Verify all connections between the ATDC sensor and the machine are clean and connected properly. If the code persists, replace the imaging unit.


    C-0F32 is displayed.

    CAUSE: Improper operation of sub-hopper sensors.
    SOLUTION: Check to make sure the sub-hopper empty switch and magnet assembly are operating properly.

  3. #3
    Senior Tech 100+ Posts tech9's Avatar
    Join Date
    Apr 2009
    Location
    london
    Posts
    219
    Rep Power
    33
    Thanks mate will check it out in the morning !

  4. #4
    ALIEN OVERLORD 2,500+ Posts fixthecopier's Avatar
    Join Date
    Apr 2008
    Location
    The Republic of Pineland
    Posts
    4,716
    Rep Power
    134
    Is this a Bizhub 350, or a Di 350, there is a difference. The code makes me think Di350. The info given was correct. Just change the image unit.
    The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here