Thanks Thanks:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Xerox & Kinolta
    Join Date
    Oct 2009
    Posts
    25
    Rep Power
    30

    J92-01 on Konica minolta 1050

    today we meet a big problem.When we print duplex more than one page,the first page has been outputed and the other pages are jamed in the convert roller(when the second page arrived,the roller didn't roll at all)
    then the copier show J92-01.but the sigle side print is no problem.the problem only happen in duplex mode

    I changed ADU DRIVE Board,but the problem isn't solved.I check the moter M12 and all the gear,roller,senser,they are ok.

    who can help me?
    MSN:matchdg@hotmail.com
    Xerox & Konica Minolta Tech

  2. #2
    Expert Tech 250+ Posts jma676's Avatar
    Join Date
    Mar 2009
    Location
    Cap. Fed.
    Posts
    324
    Rep Power
    0
    Look at this example, in general these issues are very simple, try to look at the paper ticket, it is common to find small pieces of paper to stop the passage of paper, check all sensors in addition to the PS48-PS46 may have dirt this is also common to happen.
    Attached Images Attached Images

  3. #3
    Trusted Tech 50+ Posts Chromatik's Avatar
    Join Date
    Aug 2010
    Location
    Santa Cruz
    Posts
    71
    Rep Power
    0
    OK, Something similar happens in the DI850/750

  4. #4
    Expert Tech 250+ Posts jma676's Avatar
    Join Date
    Mar 2009
    Location
    Cap. Fed.
    Posts
    324
    Rep Power
    0
    good luck!!!!!!!

  5. #5
    Trusted Tech 50+ Posts Chromatik's Avatar
    Join Date
    Aug 2010
    Location
    Santa Cruz
    Posts
    71
    Rep Power
    0
    Tanks!*

  6. #6
    Expert Tech 250+ Posts jma676's Avatar
    Join Date
    Mar 2009
    Location
    Cap. Fed.
    Posts
    324
    Rep Power
    0
    Quote Originally Posted by Chromatik View Post
    OK, Something similar happens in the DI850/750

    if so these failures are similar in these models.

  7. #7
    Trusted Tech 50+ Posts costel fasola's Avatar
    Join Date
    Jun 2010
    Posts
    69
    Rep Power
    0

    Re: J92-01 on Konica minolta 1050

    i have similar problem (when duplexing) 92-01, 92-02, 93-01 but only at first page at job. he`s jam but if unblock he run`s to finish paper or next job.
    i change ADU unit (ALL unit)
    Any sugestion?

  8. #8
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,397
    Rep Power
    152

    Re: J92-01 on Konica minolta 1050

    Quote Originally Posted by Chromatik View Post
    OK, Something similar happens in the DI850/750
    Ok on this model B601/750 and the like, there is mylar you need to replace or just remove on the u channel shaped bracket holding 2 driven rollers on the bottom of the ADU at the entrance leaving the fuser. These things fail like clockwork at around 350K it gets eaten thru by paper leaving edges for the paper to catch on.

  9. #9
    Trusted Tech 50+ Posts costel fasola's Avatar
    Join Date
    Jun 2010
    Posts
    69
    Rep Power
    0

    Re: J92-01 on Konica minolta 1050

    Quote Originally Posted by costel fasola View Post
    i have similar problem (when duplexing) 92-01, 92-02, 93-01 but only at first page at job. he`s jam but if unblock he run`s to finish paper or next job.
    i change ADU unit (ALL unit)
    Any sugestion?
    PROBLEM ON BIZHUB1050

  10. #10
    Trusted Tech 50+ Posts costel fasola's Avatar
    Join Date
    Jun 2010
    Posts
    69
    Rep Power
    0

    Re: J92-01 on Konica minolta 1050

    any ideea ?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here