Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Field Supervisor 500+ Posts
    bizhub C350 C0018

    mansart's Avatar
    Join Date
    Apr 2009
    Posts
    846
    Rep Power
    54

    bizhub C350 C0018

    I can reset this code by opening and closing front door, however when machine cycles to warm up code returns, presumably at the time the color drums are suppose to spin.....

    I'm returning to account with a new drum motor..............is there anything else that is a common cause for this error code?

    TIA

  2. #2
    All things Konica Minolta 1,000+ Posts Stirton.M's Avatar
    Join Date
    Oct 2009
    Location
    Calgary
    Posts
    1,813
    Rep Power
    52
    The drum motor is the correct route to go.

    You could try to check over the drum units and ensure they are moving freely. And as a small check, shake the IUs end to end to loosen up the developer, it may also be contributing.
    "Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
    ---Groucho Marx


    Please do not PM me for questions related to Konica Minolta hardware.
    I will not answer requests or questions there.
    Please ask in the KM forum for the benefit of others to see the question and give their input.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here