Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Dec 2006
    Rep Power

    Konika Bizhub C350 Error code C of 3D

    Trying to locate the meaning of this error code....Customer installed-replaced all of the chips for the imaging units,first few copies were faint. then on the console gave the error message C of 3D.what can I do Tried to clear error code using power off,power on and holding Utility button....did not do anything....

  2. #2
    CAUSE: Error code can be caused by the black imaging unit, the black ATDC sensor, PWB-MC or PWB-MFP. If ICP4 on PWB-MC opens, the C-0F3D will also occur.
    SOLUTION: Try one or more of the following:
    1. Remove and clean the black ATDC sensor located under the black imaging unit.
    2. Replace the black imaging unit.
    3. Replace PWB-MC board .
    4. Replace PWB-MFP board .

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=

IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here