[QUOTE=TALALOO;195880]I can help you to give the reasons that give you this code:
C3B07 IH input power error :
1• While the IH heater was on, input power
stayed at the high voltage power detection
value or over for more than the predetermined period of time.
2• While the IH heater
was on, input power was at the low power detection value or
under for more than the predetermined period of time.
3• While the IH heater
was on, input power was at the high voltage detection value orover for more than the predetermined period of time.
4• While the IH heater
was on, input power was below the low voltage detection value or
under for more than the predetermined period of time.
5• While the IH heater was on, inverter power stayed at the
upper limit value or over for more than the predetermined period of time.
6• While the IH heater
was on, output voltage halt was detected .
Step Action:
1 Check the connection of the fusing unit.
2 Check the fusing unit, degaussing coil unit,
IHPU, PRCB and REDB for proper connection and correct or change as necessary.
3 Change dega
ussing coil unit .
4 Change IHPU
5 Change PRCB
6 Change REDB
GOOD LUCK
Hi I have the same trouble C3B807 but with another model Bizhub 754e, I just like to ask if it happen for you to have the schematic diagram of the IH power supply?
thank you
have a great day.
Bookmarks