Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Jun 2010
    Posts
    58
    Rep Power
    29

    Konica 7135/IP 423 Printing Issues

    Im more of a kyocera guy so this is some unfamiliar territory for me...I went out just to set up a Konica 7135 just for printing, easy right? Well it started out bad, everytime i changed the port on the machine it would increase the number by 1 (is this normal?). I put in 9100 and the status page would say it was 9101. I put in 9099 and the status page said it was 9100. This was fine and dandy but it only worked with 9101, no biggie thats fine.

    But then all the drivers i downloaded from the konica minolta website kept giving me problems. The first PS one i tried kept printing out 20 pages of garbled junk when i went to print a test page, tired the PCL driver listed and the computer kept crashing everytime i would access the properties of it. Same thing happened on another computer, so im assuming its the driver. Eventually i broke down and just used an HP driver for the time being. Any thoughts or suggestions would be much appreciated.

    Thanks!

  2. #2
    Senior Tech 100+ Posts dallas's Avatar
    Join Date
    Jun 2008
    Posts
    115
    Rep Power
    34
    Use a LPR Port. Queuename: PORT1

    Refer the User Manual Download Result - Download Center | KONICA MINOLTA

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here