Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Bradley
    Join Date
    Feb 2008
    Location
    East Ridge, TN
    Posts
    43
    Rep Power
    25

    Anyone Seen C-3903 on a 1051 during setup?

    This thing is giving me fits. Set it up and out of the box during inital warmup, it codes out with a C-3903 (Infared Thermistor low temp) Since I had another 1051 i just swapped out the fuser to no avail. reseated all connectors relating to the fuser sensors and controls as well as the HV lines for the heat lamps. Also, I relocated the machine to a different power outlet. Any other ideas guys?

    Thanks in Advance.

  2. #2
    Bradley
    Join Date
    Feb 2008
    Location
    East Ridge, TN
    Posts
    43
    Rep Power
    25

    Re: Anyone Seen C-3903 on a 1051 during setup?

    Quote Originally Posted by KMnyafayce View Post
    This thing is giving me fits. Set it up and out of the box during inital warmup, it codes out with a C-3903 (Infared Thermistor low temp) Since I had another 1051 i just swapped out the fuser to no avail. reseated all connectors relating to the fuser sensors and controls as well as the HV lines for the heat lamps. Also, I relocated the machine to a different power outlet. Any other ideas guys?

    Thanks in Advance.
    Just wanted to update everyone on this. *It was a bad Printer Control Board. *Once I swapped it out, it was working great.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here