Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1
    Technician
    Join Date
    Oct 2011
    Location
    kampala,kireka
    Posts
    31
    Rep Power
    21

    c220 Not loading the firmwire

    l have a c220 and it is not loading the firm ware for the MFP lt shows NG
    it loads all the firm ware for all others like the ADF, scanner, PRCB
    but for the MFP it shows NG.
    and when l restart the machine it doeznot start to complete,
    lt stops on the white screen
    the firm ware i use is the lattest one
    what should l do some help pliz...........

  2. #2
    Field Supervisor 500+ Posts kingarthur's Avatar
    Join Date
    Feb 2008
    Posts
    821
    Rep Power
    41

    Re: c220 Not loading the firmwire

    i think that there are problems associated with some versions of firmware..apparently it's not the firmware..but certain boards are "different"..."due to the tsunami"...so not all firmware will go into every version of MFP...sorry it's a bit vague...you might have to find an earlier version of firmware
    Tip for the day; Treat every problem as your dog would.....If you cant eat it or f*ck it....then p*ss on it & walk away...

  3. #3
    Technician
    Join Date
    Dec 2011
    Location
    Warsaw
    Posts
    25
    Rep Power
    20

    Re: c220 Not loading the firmwire

    kingarthur is correct, if you open right door and you see a square sticker (i think it was green or red), you need to load certain firmware.

  4. #4
    Field Supervisor 500+ Posts
    Join Date
    Jan 2009
    Location
    UK
    Posts
    711
    Rep Power
    37

    Re: c220 Not loading the firmwire

    Also on the latest firmware you have to update the boot rom. There is a button on the first screen that appears when you switch the machine on with your usb stick in. Press that. If the machine needs it, it will update, if not it will tell you the latest version is already installed. Do this before updating the rest of the firmware. The latest firmware is backwards compatable with all previous versions of boards and I 've had no issues doing firmware updates on this product. Hope this helps...

  5. #5
    Senior Tech 100+ Posts
    Join Date
    Mar 2008
    Posts
    116
    Rep Power
    29

    Re: c220 Not loading the firmwire

    I think the Japan earthquake problem is referring on scanner FW and not MFPB FW on these models. It's only Scanner FW which deffers. So in your case first of all i would suggest you to use an other USB Stick or it may be the MFPB which is defect. In any case you should also try an older FW for example 90 and see what happens. Anyway what's the reason you wanted to update the machine and how old is she?

  6. #6
    Technician
    Join Date
    Oct 2011
    Location
    kampala,kireka
    Posts
    31
    Rep Power
    21

    Re: c220 Not loading the firmwire

    l have tried to all the steps told but no good result yet
    the firm w
    ire i load is of the version aoedoyo-fooo-gc7-59(00)
    is it of the up to d
    ate firmwire pliz some help what should l do
    th
    aks for the results

  7. #7
    Senior Tech 100+ Posts jrf's Avatar
    Join Date
    Feb 2009
    Location
    Galway
    Posts
    146
    Rep Power
    27

    Re: c220 Not loading the firmwire

    Try selecting only MFP and it may load, this happened to me on a C452 , good luck

  8. #8
    Technician
    Join Date
    Oct 2011
    Location
    kampala,kireka
    Posts
    31
    Rep Power
    21

    Re: c220 Not loading the firmwire

    l have tried to all the steps told but no good result yet even when l change and download only the MFP and the reson why l was upgrading the firm wire was that the machine could bring an error code 2555 and 2556 even when l change all the componets like PRCB, hopper section , relay board , develping units and asked 4 help and there was no reply. but now it has developed some other problems

  9. #9
    Service Manager 1,000+ Posts
    c220 Not loading the firmwire

    habik's Avatar
    Join Date
    Apr 2010
    Posts
    2,029
    Rep Power
    53

    Re: c220 Not loading the firmwire

    Quote Originally Posted by bkamoga View Post
    l have tried to all the steps told but no good result yet even when l change and download only the MFP and the reson why l was upgrading the firm wire was that the machine could bring an error code 2555 and 2556 even when l change all the componets like PRCB, hopper section , relay board , develping units and asked 4 help and there was no reply. but now it has developed some other problems
    May sound silly but have you tried Trouble Reset? Are you using OEM toner?
    .OK Google! ... will I need Berrocca this morning?
    Firmwares HERE

  10. #10
    Senior Tech 100+ Posts
    Join Date
    Mar 2008
    Posts
    116
    Rep Power
    29

    Re: c220 Not loading the firmwire

    Quote Originally Posted by bkamoga View Post
    l have tried to all the steps told but no good result yet
    the firm w
    ire i load is of the version aoedoyo-fooo-gc7-59(00)
    is it of the up to d
    ate firmwire pliz some help what should l do
    th
    aks for the results
    If you have tried all these steps then it can only be the MFPB. I guess if you start the machine now you see only the sand glass on the display and machine will not boot any further. But again. GC7-59 is a special one based on 59 mass production. Have you already tried i.e 90, B8, C6 but always the mass productions of these FW?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here