Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Technician smart-refill's Avatar
    Join Date
    Jan 2012
    Location
    Brasov
    Posts
    27
    Rep Power
    25

    DiAlta Di200 - network card problems

    Hello

    I have a Di200 with Pi3502.

    Today I tried to print with my Di200 for the first time.

    The protocol address of Di200 is 10.233.21.108. Today I realized a short network with my PC and Di200. (the PC has 10.233.21.101 protocol address)

    When I tried to ping from my PC ping 10.233.21.108 errors returned. sometimes the ping was ok, but most of the times the ping retuned errors.

    I did not menage to print a test page.

    Can anybody help me?

    Thank you!

  2. #2
    Field Supervisor 1,000+ Posts RRodgers's Avatar
    Join Date
    Jun 2009
    Location
    San Bernardino
    Posts
    1,951
    Rep Power
    56

    Re: DiAlta Di200 - network card problems

    Quote Originally Posted by smart-refill View Post
    Hello

    I have a Di200 with Pi3502.

    Today I tried to print with my Di200 for the first time.

    The protocol address of Di200 is 10.233.21.108. Today I realized a short network with my PC and Di200. (the PC has 10.233.21.101 protocol address)

    When I tried to ping from my PC ping 10.233.21.108 errors returned. sometimes the ping was ok, but most of the times the ping retuned errors.

    I did not menage to print a test page.

    Can anybody help me?

    Thank you!
    I believe those little PI's are little external fiery print controllers. Those are kinda known for the HDD's to go out on them after a couple/few years. Can you get to the network settings from the copier? Maybe try a ping 10.233.21.108 -t and let it run to see if it pings over a given time of about 3~5 mins. If it pings then stops then pings then stops it's the fiery stuck constantly rebooting and probably time for a new hard drive and OS reload.
    Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

  3. #3
    Service Manager 2,500+ Posts
    DiAlta Di200 - network card problems

    Hansoon's Avatar
    Join Date
    Sep 2007
    Posts
    3,199
    Rep Power
    94

    Re: DiAlta Di200 - network card problems

    Bad news. Those NIC's go bad by aging. No replacement from the factory since years. About a million posts here in this forum about that issue.

    Hans

  4. #4
    Technician smart-refill's Avatar
    Join Date
    Jan 2012
    Location
    Brasov
    Posts
    27
    Rep Power
    25

    Re: DiAlta Di200 - network card problems

    Thank you Hans!

    I will try to print using the parallel port.

    Best Regards!

    Sorin from Romania

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here