Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7

Thread: Bh600+FS-604

  1. #1
    Technician blago_vd's Avatar
    Join Date
    Apr 2009
    Location
    Sofia
    Posts
    38
    Rep Power
    31

    Bh600+FS-604

    Hello,
    is it possible Bh600 to work properly with FS-604?
    If it is, then how?
    Thanks in advance.

  2. #2
    Service Manager 1,000+ Posts
    Join Date
    Apr 2009
    Location
    LaPorte Indiana
    Posts
    1,054
    Rep Power
    43

    Re: Bh600+FS-604

    Yes!......Place the bh600. then place a bh920 and plug the finisher in to the 920!

  3. #3
    Technician blago_vd's Avatar
    Join Date
    Apr 2009
    Location
    Sofia
    Posts
    38
    Rep Power
    31

    Re: Bh600+FS-604

    Thanks for the clever answer ...
    I'll explain the situation - an customer with working Bh600+FS-604 configuration wanted to upgrade the firmware. I installed V.31 mass production, taken from Infohub. After installing the firmware and restarting the machine, FS-604 can not make connection to the machine.
    Any suggestions?

  4. #4
    Partner in crime 100+ Posts Avskrap's Avatar
    Join Date
    Jul 2011
    Location
    Stockholm
    Posts
    160
    Rep Power
    30

    Re: Bh600+FS-604

    Are you sure the firmware update didn't fail some step? Try reloading it, I've had to do it 3-4 times on some machines, why I don't know... Also make sure the firmware supports the finisher - Some software don't, for some unknown reason.

    EDIT: Are you sure it's a FS-604? As the previous clever poster said, it's for the bizhub 920. FS-602 is the folding finisher for the 600, and FS-504/505 are the staple finishers.

  5. #5
    Service Manager 1,000+ Posts
    Join Date
    Apr 2009
    Location
    LaPorte Indiana
    Posts
    1,054
    Rep Power
    43

    Re: Bh600+FS-604

    Exactly!

  6. #6
    Technician blago_vd's Avatar
    Join Date
    Apr 2009
    Location
    Sofia
    Posts
    38
    Rep Power
    31

    Re: Bh600+FS-604

    Hello,
    I've installed the firmware several times, but only first time appeared "fnisher" in ISW board selection menu. After the first installation of the firmware the finisher "disappeared". I know that this finisher is for Bh920, but also this finisher somehow worked with Bh600. The bad thing is that the finisher acts like it has no power.

  7. #7
    Partner in crime 100+ Posts Avskrap's Avatar
    Join Date
    Jul 2011
    Location
    Stockholm
    Posts
    160
    Rep Power
    30

    Re: Bh600+FS-604

    My guess is that you had a fluke with it working to begin with and now that you've updated the firmware the machine doesn't recognize the finisher. Either downgrade to see if it works or get a proper finisher

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here