Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: KonMin C220

  1. #1
    copiertech 500+ Posts
    Join Date
    Jul 2007
    Location
    Hanover Ontario
    Posts
    652
    Rep Power
    43

    KonMin C220

    I am working on a KonMin C220 that is skewing when copying from the glass and DF but not when printing. I know on some of the older machines you could just kinda give it a chiropractic adjustment by lifting on the left corner of the scanner bed, but, this one seems pretty tight. I was wondering if anyone knows if there is a mechanical adjustment for this. It is skewing from both trays and the bypass in landscape and portrait so I am pretty sure it isn't a tray problem. I stopped the paper at the reg roller and it is straight there. Any help is appreciated.
    Thanks
    Darren

  2. #2
    Field Supervisor 2,500+ Posts
    Join Date
    Jun 2009
    Posts
    3,009
    Rep Power
    97

    Re: KonMin C220

    There are 4 hard rubber spacers the lamp assy rides on..Check to see if one came off..We also see this when the frame has been twisted by our industrious delivery teams on install. Emujo

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here