Thanks:
0
Likes:
0
Dislikes:
0
-
Trying to resetdrum counter after installation on Imagistics IM2520(ZF25)
I referred to Konica Minolta DI2510 service manual and attempted reset but was blocked at one point. I pressed Utility, Meter Count, then stop 00 stop 01. Then instead of options to choose there was a blue box in which to enter number. I tried serial number and pressed enter but nothing. Any help is appreciated. Frank/ActionPhotocopy
-
Senior Tech
100+ Posts
- Rep Power
- 0
Re: Trying to resetdrum counter after installation on Imagistics IM2520(ZF25)
-
Re: Trying to resetdrum counter after installation on Imagistics IM2520(ZF25)
Thank you very much Scotty. Frank
-
Re: Trying to resetdrum counter after installation on Imagistics IM2520(ZF25)
Entered the 8 zeros as suggested and was able to reset. Also had to leave right side door open during reset for it to take. Frank
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks