Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    System Engineer 100+ Posts
    Join Date
    Oct 2007
    Location
    san diego
    Posts
    136
    Rep Power
    35

    Bizhub 25, not detecting new toner cartridge

    Bizhub 25 same as a muratec 25 something? Not detecting new toner cartrdige (put two new ones just to confirm), the machine is new, any ideas? Did a sensor check and TS1 has values changing, TS2 does not have any values changing. What is normal?

  2. #2
    Head Tech 500+ Posts SmellsHot's Avatar
    Join Date
    Dec 2009
    Location
    Sault Ste Marie, MI
    Posts
    512
    Rep Power
    36

    Re: Bizhub 25, not detecting new toner cartridge

    haha...ok here goes....
    Pull out the toner cartridge. On the back there is a fuse that has two copper pins coming out of it. Pry these up slightly and install a paper clip between the two of them to jump the fuse. With the machine still on re install toner cartridge. After a few seconds you should get an error. Turn the machine off, pull out the toner, remove the paper clip and reinstall the toner cartridge power on the copier and it should reset the toner for ya. Hope this helps!
    Everyone has the right to be stupid. Some people just abuse this privelage more than others

  3. #3
    System Engineer 100+ Posts
    Join Date
    Oct 2007
    Location
    san diego
    Posts
    136
    Rep Power
    35

    Re: Bizhub 25, not detecting new toner cartridge

    Thanks for the advice, I will try it next week.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here