Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 9 of 9
  1. #1
    Senior Tech 100+ Posts suomi's Avatar
    Join Date
    Oct 2008
    Posts
    152
    Rep Power
    33

    Question C652 No drum reset

    2 New black drum unit tested & no reset drum counter!!!
    Last edited by suomi; 04-10-2012 at 09:27 AM.

  2. #2
    Service Manager 5,000+ Posts
    C652 No drum reset


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    154

    Lightbulb Re: C652 No drum reset

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

    Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

    Paul@justmanuals.com

  3. #3
    Step aside, noob 1,000+ Posts EarthKmTech's Avatar
    Join Date
    May 2009
    Location
    Gigety
    Posts
    2,142
    Rep Power
    75

    Re: C652 No drum reset

    Make sure the pins arent bent on the dv unit that contact the drum chip.

    Had this happen before when inexperienced tech replaced drum cart in a ham fisted manner

  4. #4
    Senior Tech 250+ Posts
    C652 No drum reset


    Join Date
    May 2011
    Location
    UK
    Posts
    300
    Rep Power
    31

    Re: C652 No drum reset

    Check that there are no "P" codes up, as I think if there is the drum will not reset.

  5. #5
    Field Supervisor 2,500+ Posts
    Join Date
    Jun 2009
    Posts
    3,009
    Rep Power
    97

    Re: C652 No drum reset

    Most likely you have not followed the instructions properly...the front door must be open when you do the reset. Emujo

  6. #6
    Senior Tech 100+ Posts suomi's Avatar
    Join Date
    Oct 2008
    Posts
    152
    Rep Power
    33

    Re: C652 No drum reset

    yes if you change fusing unit or transfer belt. But NOT drum...

  7. #7
    Step aside, noob 1,000+ Posts EarthKmTech's Avatar
    Join Date
    May 2009
    Location
    Gigety
    Posts
    2,142
    Rep Power
    75

    Re: C652 No drum reset

    Ahh, that proceedure is for the belt and fusing unit. The drum is provided with a "new article detection device"

  8. #8
    Technician
    Join Date
    May 2010
    Location
    east london
    Posts
    14
    Rep Power
    29

    Re: C652 No drum reset

    Had same problem!!!! Check cn32 on PRCB for proper connection....

  9. #9
    Senior Tech 100+ Posts suomi's Avatar
    Join Date
    Oct 2008
    Posts
    152
    Rep Power
    33

    Re: C652 No drum reset

    did not help but still running. B IU counter is over 11000...

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here