Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Aug 2011
    Location
    ZIMBABWE
    Posts
    68
    Rep Power
    0

    minlta error cde

    hi guys,i have a minolta ep 2010 cspro which is giving an error code c00-00,the machine can do all the warming up process but if i press the start button it pushes the paper up to the drum section then an error comes on.does an 1 knws the problem plz help im stranded.

  2. #2
    Senior Tech 250+ Posts montana's Avatar
    Join Date
    Aug 2008
    Location
    benghazi
    Posts
    394
    Rep Power
    0

    Re: minlta error cde

    hi...the manual says c0000:main drive motor failure to turn.defective M2.defective PWB-A.over loaded rolls\roller gears belti advise you also to check the drum cart & developing unit gears and pushingcheck the starter may it is cakedi wish you good luck

  3. #3
    Service Manager 1,000+ Posts
    minlta error cde


    Join Date
    Mar 2012
    Posts
    1,220
    Rep Power
    50

    Re: minlta error cde

    Quote Originally Posted by montana View Post
    hi...the manual says c0000:main drive motor failure to turn.defective M2.defective PWB-A.over loaded rolls\roller gears belti advise you also to check the drum cart & developing unit gears and pushingcheck the starter may it is cakedi wish you good luck
    Good stuff, but oh Lord, please practice the enter key (to break up your comments for a digestible forum)

  4. #4
    Service Manager 5,000+ Posts
    minlta error cde


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    154

    Red face Re: minlta error cde

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

    Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

  5. #5
    Junior Member Kenneth Moniz's Avatar
    Join Date
    Jun 2008
    Location
    Karachi
    Posts
    8
    Rep Power
    0

    Re: minlta error cde

    Quote Originally Posted by RWAFA View Post
    hi guys,i have a minolta ep 2010 cspro which is giving an error code c00-00,the machine can do all the warming up process but if i press the start button it pushes the paper up to the drum section then an error comes on.does an 1 knws the problem plz help im stranded.
    heater unit drive motor is not working

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here