Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: bizhub c10

  1. #1
    Senior Tech 250+ Posts montana's Avatar
    Join Date
    Aug 2008
    Rep Power

    bizhub c10

    hi...i have problem with konica minolta bizhub c10 which giving me message when i power on the machine to enter the settings of the fax..then displaying "USA?select=OK"and stay there ...all the buttons of the control panel don't work
    i hear the sound of peeps but nothing changed....any solution guys?

  2. #2
    Service Manager 5,000+ Posts
    bizhub c10

    Join Date
    Jan 2006
    Las Vegas, NV
    Rep Power

    Lightbulb Re: bizhub c10

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads

  3. #3
    Field Supervisor 500+ Posts
    Join Date
    Dec 2009
    Rep Power

    Re: bizhub c10

    I have similar problem recently but in my case machine was starting and after some time just stuck with message "please wait" and no response after pressing anything on control panel..
    Problem solved with scanner lamp replacement.
    Lamp was giving some strange purple color of light instead white like should and CCD does not read valid signal and starting of machine stuck there.
    Check this and try put new firmware.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=

IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here