Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Jun 2008
    Location
    Quetzaltenango, Quetzaltenango
    Posts
    91
    Rep Power
    25

    C5501 and C6500 with IC 408 Windows 7 Driver

    Hi, I have two bizhub PRO one C5501 and one C6500 both with IC-408 controller. I want to know if there's a Windows 7 post script driver or if it's possible to print with them from windows xp 64 bit edition to use full memory in the pcs.

    Regards.

  2. #2
    Vulcan Inventor of Death 1,000+ Posts Mr Spock's Avatar
    Join Date
    Aug 2006
    Location
    tampa,fl
    Posts
    2,075
    Rep Power
    55

    Re: C5501 and C6500 with IC 408 Windows 7 Driver

    Fiery needs to be at version 2.0 and depending on service contract this may be costly upgrade.
    Then you need the special pcl only driver for windows 7 which supports both 32 and 64 bit versions.
    driver is only available via efi and konica minolta tech pages. at least that is the only way I found it.
    And Star Trek was just a tv show...yeah right!

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Jun 2008
    Location
    Quetzaltenango, Quetzaltenango
    Posts
    91
    Rep Power
    25

    Re: C5501 and C6500 with IC 408 Windows 7 Driver

    I have installed the PCL driver but is not as good as the PostScript. I have tried with the postscript Windows Vista version but the machines is not working OK, some times took too much time to print and other times don't recongnizes the paper sizes. I'm thinking of going back to WinXp 64 bit edition.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here