Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Oct 2011
    Posts
    72
    Rep Power
    26

    Konica 7145 registration clutch not functioning

    hI,
    Good day, just want some help, i have a konica 7145 that is always jammed on the registration rollers, and observe that the clutch was not turning, already replace similar clutch from the other working machine but still the clutch is not functioning,
    Please help.
    Cesar

  2. #2
    Senior Technician 50+ Posts mrfixit's Avatar
    Join Date
    Sep 2007
    Location
    Salem, MA
    Posts
    83
    Rep Power
    34

    Re: Konica 7145 registration clutch not functioning

    Sounds like the clutch is never getting the signal to turn on, check the sensor before the reg clutch. If you don't know how to in simulation on this model, tape the sensor arm down and see if the machine shows a jam when you close the covers.

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Oct 2011
    Posts
    72
    Rep Power
    26

    Re: Konica 7145 registration clutch not functioning

    Hi Sir,
    Is this the sensor beneath the 2 registration rollers which is located on the side of the machine? or at the back of the machine? What will i do then if it is not indicating jamming when i'm going to tape the sensor, what will i do then, i'm sorry as i am not familiar with this machine.
    Thank you very much for helping me.
    Cesar

  4. #4
    Service Manager 5,000+ Posts
    Konica 7145 registration clutch not functioning


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    154

    Lightbulb Re: Konica 7145 registration clutch not functioning

    This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

  5. #5
    Senior Technician 50+ Posts mrfixit's Avatar
    Join Date
    Sep 2007
    Location
    Salem, MA
    Posts
    83
    Rep Power
    34

    Re: Konica 7145 registration clutch not functioning

    Sorry if this sounds rude but if you can't figure that out on your own then you shouldn't be attempting to work on that machine or any other for that matter, as this is problem solving 101. This site is meant to help other technicians and it sounds like you should be in sales not service, or maybe dispatch.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here