Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: bizhub 920 pro

  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Dec 2010
    Location
    JEDDAH
    Posts
    69
    Rep Power
    0

    Exclamation bizhub 920 pro

    hi everyone i have a problem in adf for bizhub 920 pro sc 60-03 i replace adf board but now problem is when i make copy in adf paper was exit in adr try but adf motors still rotating and copy not come out i open copier side door machine will stop and i found paper there i cant under stand what happen with this machine. if any one have a idea plz help me.

  2. #2
    Field Supervisor 1,000+ Posts RRodgers's Avatar
    Join Date
    Jun 2009
    Location
    San Bernardino
    Posts
    1,951
    Rep Power
    56

    Re: bizhub 920 pro

    Sounds like you missed a connector to me.
    Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

  3. #3
    Field Supervisor 500+ Posts
    bizhub 920 pro


    Join Date
    Dec 2008
    Location
    Baltimore, Maryland
    Posts
    912
    Rep Power
    42

    Re: bizhub 920 pro

    I have brand new ADF units if you need one.

  4. #4
    Senior Tech 100+ Posts
    bizhub 920 pro


    Join Date
    Aug 2008
    Posts
    145
    Rep Power
    0

    Re: bizhub 920 pro

    was the leading edge hit something? if not, i would bet the paper path sensor faulty.

  5. #5
    Field Supervisor 500+ Posts
    bizhub 920 pro


    Join Date
    Dec 2008
    Location
    Baltimore, Maryland
    Posts
    912
    Rep Power
    42

    Re: bizhub 920 pro

    i would check i/o mode sensors on DF.

    also make sure its not a odd firmware issues, that may have been fixed in a later version. New-board may be old firmware.


    Re-seat cables, i would make a copy form the glass, make sure nothing is wrong anywhere else.


    When you replaced board, did you unplug from wall? i have seen weird stuff with older machines, when adding/replacing parts or consumables while power is on.

  6. #6
    Senior Tech 250+ Posts Mick01's Avatar
    Join Date
    Nov 2012
    Location
    Werribee Victoria
    Posts
    362
    Rep Power
    31

    Re: bizhub 920 pro

    Did you do the ADF sensor sensitivity adjustment when you replaced the board? In the service manual there is a "List of Adjustment Items" when replacing a part. It outlines what adjustments need to be made and in what order.
    Hope this helps.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here