Results 1 to 9 of 9
  1. #1
    Technician
    Join Date
    Jun 2009
    Location
    bangkok
    Posts
    45
    Rep Power
    31

    Edit serial number bizhuh C35

    Hi All.
    I am Tenichial sopport , I Renew control board and IC Chip on control board for Bizhub C35 ,but serial number remodel , how to edit serial number

    "I DO"
    1.AUTPRN.DEF
    2.DateTime.reb
    3.DateTime.pjl
    Copy file 1-3 to flash drive

    and edit file "DateTime.pjl"
    code
    %-12345X@PJL
    @PJL SET SERIALNO = "xxxxxxxxxxxxx"
    %-12345X
    but not work
    ''How to edit...Thank you"

  2. #2
    Junior Member
    Join Date
    Feb 2020
    Location
    Coachella
    Posts
    6
    Rep Power
    0

    bizhub C35 error code 13DD

    I changed the board but now I, coming up with a error 13DD would like to know how to change the 8pin counter so it can read it .. most post say I must use the old counter from the old one but have no clue where that is located. Any info and firmware or link so I can fix the problem I own a Bizhub c35 printer .. please help I’m new to repairs ..

  3. #3
    Service Manager 1,000+ Posts femaster's Avatar
    Join Date
    May 2011
    Location
    A Small City in MI
    Posts
    1,264
    Rep Power
    97

    Re: Edit serial number bizhuh C35

    Did you follow the procedure in the service manual for the board replacement?

    First, which board did you replace, PRCB, or MFPB? If it's the PRCB, then yes, you must swap the EEPROM chip from the old to new board. And make sure the notch on the chip lines up with the notch on the socket. Pull STRAIGHT up, VERY gently but firmly, do not bend the pins or crack the chip with a screwdriver. Also a good idea to make sure you have discharged any static electricity before you play around with it.

    PRCB EEPROM.jpg EEPROM.jpg

    Contents
    Trouble code
    Trouble type
    Relevant electrical parts
    13DD
    Backup data error - The engine counter data and the controller counter data are inconsistent.
    • Print control board (PRCB)
    • MFP board (MFPB)

    (2)Procedure
    Step
    Action
    Control signal
    Location (electrical component)
    1
    Select [Service Mode] / [BK Clear], and execute the BK Clear function.
    2
    Check the connector between MFPB CN16-PRCB PJ21 for proper connection and correct as necessary.
    3
    Change PRCB.
    4
    Change MFPB.
    Last edited by femaster; 02-16-2020 at 09:45 PM.
    A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 3 years.
    My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...

  4. #4
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,387
    Rep Power
    152

    Re: Edit serial number bizhuh C35

    Google "8-pin DIP IC" and look at the image. Does the original board have one of those on there?
    Whatever

  5. #5
    Junior Member
    Join Date
    Feb 2020
    Location
    Coachella
    Posts
    6
    Rep Power
    0

    Re: Edit serial number bizhuh C35

    Can u see photo

  6. #6
    Junior Member
    Join Date
    Feb 2020
    Location
    Coachella
    Posts
    6
    Rep Power
    0

    Re: Edit serial number bizhuh C35

    Quote Originally Posted by femaster View Post
    Did you follow the procedure in the service manual for the board replacement?

    First, which board did you replace, PRCB, or MFPB? If it's the PRCB, then yes, you must swap the EEPROM chip from the old to new board. And make sure the notch on the chip lines up with the notch on the socket. Pull STRAIGHT up, VERY gently but firmly, do not bend the pins or crack the chip with a screwdriver. Also a good idea to make sure you have discharged any static electricity before you play around with it.

    PRCB EEPROM.jpg EEPROM.jpg

    Contents
    Trouble code
    Trouble type
    Relevant electrical parts
    13DD
    Backup data error - The engine counter data and the controller counter data are inconsistent.
    • Print control board (PRCB)
    • MFP board (MFPB)

    (2)Procedure
    Step
    Action
    Control signal
    Location (electrical component)
    1
    Select [Service Mode] / [BK Clear], and execute the BK Clear function.
    2
    Check the connector between MFPB CN16-PRCB PJ21 for proper connection and correct as necessary.
    3
    Change PRCB.
    4
    Change MFPB.
    Mine is different it has a aluminum housing in the middle

  7. #7
    Junior Member
    Join Date
    Feb 2020
    Location
    Coachella
    Posts
    6
    Rep Power
    0

    Re: Edit serial number bizhuh C35

    Here is a photo

  8. #8
    Service Manager 10,000+ Posts
    Edit serial number bizhuh C35

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,656
    Rep Power
    658

    Re: Edit serial number bizhuh C35

    Quote Originally Posted by Unlimitedcreationslimo View Post
    Here is a photo
    where?

  9. #9
    Service Manager 1,000+ Posts femaster's Avatar
    Join Date
    May 2011
    Location
    A Small City in MI
    Posts
    1,264
    Rep Power
    97

    Re: Edit serial number bizhuh C35

    Quote Originally Posted by Unlimitedcreationslimo View Post
    Here is a photo
    There has been no photos in any of your posts. If by "aluminum housing" you mean a heatsink, then it is the MFPB. Does it look like this?

    MFPB.jpg

    If so, that is a whole different ball game. Multiple steps including changing bit switch settings, swapping things back and forth, booting and rebooting...
    A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 3 years.
    My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here