Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Step aside, noob 1,000+ Posts EarthKmTech's Avatar
    Join Date
    May 2009
    Location
    Gigety
    Posts
    1,982
    Rep Power
    57

    Is it ok to use the 50PPM fuser in a bizhub 421 ?

    For reasons out of my control, this is all i have on hand to go into the machine.

    Will it be ok ?

    I have in the past had error codes when accidently putting the 42ppm fuser in a 50ppm machine, but havent ever tried the other way round...
    If at first you don't succeed, try the way I told you how to do it in the first place.

  2. #2
    Senior Tech 100+ Posts jotunn's Avatar
    Join Date
    Jan 2010
    Posts
    247
    Rep Power
    26

    Re: Is it ok to use the 50PPM fuser in a bizhub 421 ?

    I didn't tried this in BH421, but I had the similar situation in BH420 - someone installed fuser from BH500 by mistake (or just didn't realized that they differs).
    If you really need, for a short time (I had 2 weeks) - you can use this fuser, machine will neither burn nor blow away, just from time to time, _after_ longer jobs it will show a code C-3501, short jobs are ok - but it would be nice to instruct a user how to reset fuser error codes in case of problem.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here