Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Mar 2010
    Location
    Lancaster Ohio
    Posts
    258
    Rep Power
    31

    konica 7022 2 sided doc feed problems

    hi i have a konica 7022 that has some problems when doing 2 to 2. the document feeder will sometimes ( 1 OUT OF 20 DID IT FOR ME) make like a groaning or slipping noise and then jams. the other 19 times it worked fine. customer says it usually happens more frequently. single side works fine all the time. i have replaced the clutches in back but same problem. all rubber has been cleaned. any ideas

  2. #2
    Service Manager 5,000+ Posts
    konica 7022 2 sided doc feed problems


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    154

    Lightbulb Re: konica 7022 2 sided doc feed problems

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

  3. #3
    Field Service Manager 1,000+ Posts
    konica 7022 2 sided doc feed problems

    pepper38_cnd's Avatar
    Join Date
    Aug 2005
    Location
    Windsor, ON Canada
    Posts
    1,073
    Rep Power
    51

    Re: konica 7022 2 sided doc feed problems

    One of the 2 solenoids on the front of the adf is sticking it's usually the one on the right. You can just hold it in and See if you get the same results I'm sure you will recognize the sound.
    Online Store is closed. Chip resetting is a thing of the past! Thank you to all my past customers.
    Now into Ip TV KODI Boxes

  4. #4
    Senior Tech 250+ Posts
    Join Date
    Mar 2010
    Location
    Lancaster Ohio
    Posts
    258
    Rep Power
    31

    Re: konica 7022 2 sided doc feed problems

    hi i replaced both sylenoids and still have same problem. only on 2 to 2 you sometimes get a humming noise when you push print button and you know its going to jam. thought for sure sylonoids would take care of it but no luck. any other ideas?

  5. #5
    Head Tech 500+ Posts SmellsHot's Avatar
    Join Date
    Dec 2009
    Location
    Sault Ste Marie, MI
    Posts
    512
    Rep Power
    36

    Re: konica 7022 2 sided doc feed problems

    i believe theres a one way gear near the reverse motor. Try cleaning and scrubbing the shaft.
    Everyone has the right to be stupid. Some people just abuse this privelage more than others

  6. #6
    Senior Tech 250+ Posts
    konica 7022 2 sided doc feed problems

    CraigW's Avatar
    Join Date
    Dec 2010
    Posts
    417
    Rep Power
    33

    Re: konica 7022 2 sided doc feed problems

    Have you looked at the underneath ? There is a conveyance roller and the holder splits at rear and will give 2-2 jamming. Have to look kinda close to spot it. #13GL45070 Conveyance Guide Part/Upper Seen these broken often.

  7. #7
    Senior Tech 250+ Posts
    Join Date
    Mar 2010
    Location
    Lancaster Ohio
    Posts
    258
    Rep Power
    31

    Re: konica 7022 2 sided doc feed problems

    i have replaced and tried everything suggested with no luck. just easier to replace doc. feeder

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here