Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Oct 2012
    Location
    Cardiff
    Posts
    64
    Rep Power
    0

    Tray 5 won't rise on bizhub c8000!

    I've got on important job on running crappy perfed paper that kept jamming Anyway (see previous post), and now to make matters worse tray 5 won't rise, so I've got the job running out of tray 4, which means more bending and weakening of the perfs (hence More jams :-s!)
    I don't have time to take the thing apart like I would normally do to try and figure out the problem, does anyone know the most common reasons why a tray won't rise?

    I've taken the tray out, cleaned rollers/sensors etc. to no avail.

    any help appreciated!

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Apr 2010
    Location
    Porto Portugal
    Posts
    141
    Rep Power
    22

    Re: Tray 5 won't rise on bizhub c8000!

    Quote Originally Posted by AB1984 View Post
    I've got on important job on running crappy perfed paper that kept jamming Anyway (see previous post), and now to make matters worse tray 5 won't rise, so I've got the job running out of tray 4, which means more bending and weakening of the perfs (hence More jams :-s!)
    I don't have time to take the thing apart like I would normally do to try and figure out the problem, does anyone know the most common reasons why a tray won't rise?

    I've taken the tray out, cleaned rollers/sensors etc. to no avail.

    any help appreciated!

    ..normaly is one belt out of the stay.....

  3. #3
    Senior Tech 100+ Posts
    Tray 5 won't rise on bizhub c8000!

    DigiMan's Avatar
    Join Date
    Jan 2013
    Location
    In a gadda da vida
    Posts
    240
    Rep Power
    19

    Re: Tray 5 won't rise on bizhub c8000!

    Quote Originally Posted by AB1984 View Post
    I've got on important job on running crappy perfed paper that kept jamming Anyway (see previous post), and now to make matters worse tray 5 won't rise, so I've got the job running out of tray 4, which means more bending and weakening of the perfs (hence More jams :-s!)
    I don't have time to take the thing apart like I would normally do to try and figure out the problem, does anyone know the most common reasons why a tray won't rise?

    I've taken the tray out, cleaned rollers/sensors etc. to no avail.

    any help appreciated!

    I agree with remati,had this thing couple of times(on 1051s PFU's),take out the tray and look inside the PFU.On the top one of the belts is out of place and its blocking the sensor that detects paper.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here