Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2009
    Rep Power

    IC-409 bizhub c550 config

    Hey everyone:
    how to configure the IP address for ic-409 in my bizhub c550

  2. #2
    FSS / SPM 100+ Posts Setright's Avatar
    Join Date
    Nov 2008
    Rep Power

    Re: IC-409 bizhub c550 config

    You need to access the "Controller Settings" via the Administrator menu on the front panel if you don't know the current address.

    Since the Fiery and the Emperon (engine) have to communicate you need to be patient. Once you enter the Setup of the Fiery, the buttons will come and go until you finally have access to the menus.

    Difficult to explain in writing.

    If you know the current IP address you can access the "Configure" button via a webbrowser.

    You can also find the controller using Command Workstation and reach the Configure/Setup that way.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=

IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here