Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Senior Tech 100+ Posts
    c451 printing cyan lines

    Lasersupplies's Avatar
    Join Date
    Jul 2011
    Location
    UK
    Posts
    220
    Rep Power
    0

    c451 printing cyan lines

    Hi all

    I have a bizhub c451 out with a client at the moment, and after 600 or so prints a cyan border starts to come across the bottom of the page. I have changed a few cyan imaging units but get the problem comes back its always after 600 prints, I have changed the black image unit also but same thing. When I take apart the cyan imaging unit I can see what appears to be black toner on the silver wire (if that makes sense!) and black toner around the imaging unit.

    Has anybody came across this or have any ideas?

    Thanks

  2. #2
    Field Supervisor 500+ Posts Zeldaman's Avatar
    Join Date
    Mar 2011
    Location
    Stuttgart/Baden Wuerttemberg
    Posts
    942
    Rep Power
    47

    Re: c451 printing cyan lines

    Hi tbere!
    only thing is to glue "reinforcements" on the pads that hold the pcdu's in place. Otherwise you have a bad pcdu, sorry.
    Greetings...

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here