Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: C253 No power

  1. #1
    Senior Tech 100+ Posts Haroldbfix's Avatar
    Join Date
    Feb 2008
    Location
    Katy
    Posts
    208
    Rep Power
    35

    C253 Black Panel

    Actually the machine will light up for a couple of seconds and then power down, after that its dead,no LED's no light just dead. Any ideas?
    Last edited by Haroldbfix; 04-11-2008 at 09:32 PM.

  2. #2
    Conservative in Exile 250+ Posts laserman06's Avatar
    Join Date
    Dec 2007
    Location
    Hebron, KY
    Posts
    323
    Rep Power
    37
    Quote Originally Posted by Haroldbfix View Post
    Actually the machine will light up for a couple of seconds and then power down, after that its dead,no LED's no light just dead. Any ideas?
    My first guess would be NVRAM, or HVPS.
    The family that prays together, stays together!
    Smile God created you and He doesn't make mistakes!

    Relax, God IS in control!

    Be still and know that I am God
    Ps 46:10

  3. #3
    Technician
    Join Date
    Apr 2008
    Location
    victoria
    Posts
    25
    Rep Power
    33

    had this on c250

    have a c250 doing this and it is the MFP board.
    have changed mfp and problem gone.display comes up for apx one minute and then dies. powering off ond on repeats problem.

  4. #4
    Technician
    Join Date
    Apr 2008
    Location
    nsw
    Posts
    24
    Rep Power
    33
    Have had NVRAM do this before. I would try it first the look at board..

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Apr 2008
    Posts
    71
    Rep Power
    33
    Quote Originally Posted by laserman06 View Post
    My first guess would be NVRAM, or HVPS.
    You could try the NVRAM recovery firmware.

    Worked for me before. There was a setting somewhere that had to be done or the machine said it was generic and a better looking boot screen came up. Can't remember which dip setting it was.

  6. #6
    Rene
    Guest

    NV-RAM recovery??

    I also thought of a NV-Recovery first but my informations are that there is no NV-Recovery Software for the C253 series available??
    I would be happy to get this software!!

  7. #7
    ALIEN OVERLORD 2,500+ Posts fixthecopier's Avatar
    Join Date
    Apr 2008
    Location
    The Republic of Pineland
    Posts
    4,716
    Rep Power
    134

    Cool

    Same problem on a bizhub 250 and swapping the NVRAM fixed it.

  8. #8
    Rene
    Guest
    Swapping the NV-RAM will fix it for sure but my informations are that there is no NV-Recovery Software fore the C253 available...
    If my infos are wrong please let me know

  9. #9
    Trusted Tech 50+ Posts
    Join Date
    Apr 2008
    Posts
    71
    Rep Power
    33
    Quote Originally Posted by Rene View Post
    I also thought of a NV-Recovery first but my informations are that there is no NV-Recovery Software for the C253 series available??
    I would be happy to get this software!!
    Sorry Somehow I mixed up the models. I have had to use the nvram recovery chip on the c250 not c253. Again sorry for mixup

  10. #10
    Field Supervisor 500+ Posts
    C253 No power

    ni311's Avatar
    Join Date
    May 2008
    Posts
    658
    Rep Power
    39
    It's from the NVRam. There is a tool that writes to a CF card the files to reset the NVRam. The copier will keep all the counters but you have to do all the steps from the installation.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here