Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Senior Tech 100+ Posts
    c6501 is it in finisher or main body?

    MVPunisher's Avatar
    Join Date
    May 2013
    Location
    hudson falls
    Posts
    207
    Rep Power
    27

    c6501 is it in finisher or main body?

    I am getting a mixture of finisher jam codes from my fs-607 (j7216, j7222 mostly). Only running face down mode this jams and also folds some of the corners slightly.

    Face up works completely fine and so does duplexed. This would tell me it is in the reverse section correct?

    However when I take the finisher off and run face down I get no jams and no folded corners.

    I'm thinking a firmware or communication bug because this isn't making sense to me.

    If it was a finisher issue I'd expect it to also occur on duplex and face up.

    If it was a main body issue I'd expect it would still do it when I remove the finisher?

    Hmm

  2. #2
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    5,396
    Rep Power
    152

    Re: c6501 is it in finisher or main body?

    The paper curl is slightly different using the different modes. The conners catch on face down because the curl it in the opposite direction? Check your centering.

  3. #3
    Senior Tech 250+ Posts Mick01's Avatar
    Join Date
    Nov 2012
    Location
    Werribee Victoria
    Posts
    362
    Rep Power
    31

    Re: c6501 is it in finisher or main body?

    Hi,
    i would also check the height of the finisher compared with the main body. I agree with the previous comment that it would be a paper curl issue.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here