Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1

    km 751 black shadow

    i have proplem with konika minolta 751

    there is a black shadow on the back just when i print duplex

  2. #2
    Master Of The Obvious 10,000+ Posts
    km 751 black shadow

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Lapeer, Michigan
    Rep Power

    Re: km 751 black shadow

    What have you done so far? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    RTFM!! 5,000+ Posts allan's Avatar
    Join Date
    Apr 2010
    Rep Power

    Re: km 751 black shadow

    Good luck with that. If you don't use good consumables on those machine u are going to have a bad time. Even with good consumables the machine is going to keep you busy.
    If they were not so cheap to run i would not even bother with them.

    You must calibrate the drum to the correct voltage as per the voltage on the drum flange (only when installing a new drum).

    There are good threads if you search for B600/B750/B601/B751.

    Common problems on these machines are.

    Bad dev bias connection.
    Bad mag roller angle.
    Bad developer life.
    Dirty/bad erase lamp.

    Check you life counters
    if the drum is over 500K change it.
    If the developer is over 100K change it.
    If the charge unit is older that 500K service it.
    If the dev tank is over 1M change it
    The toner collection roller on 500K as well.

    Then check the soft switches, set them to default if you don't know the tweaks.
    My bet is that its developer related.

    Change your drum and developer and set you maintenance counter to 75K for a vacuum service and a web inspection. This way you dev can reach up to 200K.

  4. #4

    Re: km 751 black shadow

    Thank you very much , the problem solved after replace toner collecting roller


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=

IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here