Forum: Konica Minolta

  1. Red face Bizhub c451

    Started by thuo, 03-14-2010
    421, big, biz hub, bizhub, bizhub c451, c45, c451, code, connected, connector, cooling, diagram, fan, hub, machine, manual, motor, nec, paper, rear, section, throws
    • Replies: 0
    • Views: 1,237
    thuo
    03-14-2010 Go to last post

  2. dialta351 how can I change IP adress?

    Started by javier4065, 03-13-2010
    168, address, change, configuration, copier, dial, dialta, display, ect, install, intro, ip address, konicaminolta, modify, ops, page, pages, power, press, prints, shows, stall, vpn, wan
    • Replies: 8
    • Views: 919
    rar0411
    03-14-2010 Go to last post

  3. C350 error c-3e05

    Started by copierlady, 03-13-2010
    152, c35, c350, clock, error, manual, part, ram, replac, replace, replacement, reset, s or, service, service manual, solution, solutions, special, time
    • Replies: 5
    • Views: 2,356
    RRodgers
    03-13-2010 Go to last post

  4. Bizhub c451 3b02 ih malfunction

    Started by thuo, 03-10-2010
    3b02, 451, bizhub, bizhub c451, c45, c451, code, control, covers, documentation, driver, duc, error, error code, failure, fuser, fuser unit, good, heater, malfunction, nuts, shows, unit
    • Replies: 5
    • Views: 4,046
    scallanjoe@yahoo.com
    03-13-2010 Go to last post

  5. PB-501 msg Impossible to perf.bind because body is too thick.

    Started by sbillis, 03-10-2010
    bind, c650, c6501, controller, cover, documents, firmware, folding, history, issue, jam, job, message, msg, paper, paper jam, pb-501, printed, roller, section, size, thick, update
    • Replies: 3
    • Views: 1,138
    sbillis
    03-13-2010 Go to last post

  6. Konica CF3102 control panel doesn't go past the initial warm up screen

    Started by williamsluu, 03-12-2010
    102, 287, cable, cf3102, check, control, control panel, hi all, initial, konica, office, panel, plugged, problem, sca, scan, scanner, screen, warm, work
    • Replies: 8
    • Views: 1,463
    RRodgers
    03-13-2010 Go to last post

  7. Print problem with minolta c250

    Started by robizhub, 03-08-2010
    black, c25, c250, color, copyi, empty, gray, image, minolta, pdf, print, print problem, printing, problem, sheet, tire, white, word 1 Attachment(s)
    • Replies: 6
    • Views: 1,010
    robizhub
    03-13-2010 Go to last post

  8. Converting Bizhub BW420 to BW500.

    Started by Hansoon, 03-13-2010
    bh500, bizhub, bizhub 420, cpm, formation, information, speed
    • Replies: 0
    • Views: 1,024
    Hansoon
    03-13-2010 Go to last post

  9. bizhub601 memory full on large scans

    Started by AVux07, 03-10-2010
    1500, 200, 500, b/w, bizhub, c35, c352, documents, folder, full, job, machines, management, memory, memory full, message, page, page count, pdf, problem, ram, scan, scans, shows, smb, solution, user box
    • Replies: 4
    • Views: 2,105
    Mr Spock
    03-13-2010 Go to last post

  10. 2nd side wrinkles on C451

    Started by emujo, 03-12-2010
    11x17, 2nd, area, brand new, c45, c451, change, copy, customer, duplex, edge, fuser, good, jobs, lead, lead edge, roller, show, side, sided, speed, wrinkles
    • Replies: 1
    • Views: 923
    Mr Spock
    03-12-2010 Go to last post

  11. bizhub 362 reboots mid copy run

    Started by KEVIN900, 03-12-2010
    362, abort, bizhub, boot, code, copy, date, fine, firmware, fuser, long, machine, meter, monitor, multi, outlet, power, reboots, run, switches, tech
    • Replies: 4
    • Views: 1,129
    KEVIN900
    03-12-2010 Go to last post

  12. And in the end I

    Started by RRodgers, 03-10-2010
    2 Pages •
    1 2
    amou, breakdown, config, consumable, drum, find, kit, konica, konicaminolta, lef, manual, manuals, mykonicaminolta, numbers, page, part, parts, parts manual, roller, rrodgers, service, service manual, service manuals, tech, website
    • Replies: 11
    • Views: 1,980
    scallanjoe@yahoo.com
    03-12-2010 Go to last post

  13. C2701 (again) bizhub 420

    Started by aleksander, 03-12-2010
    420, 500, bizhub, bizhub 420, charging, check, code, copyi, copying, corona, drum, error, error code, hi all, lot, model, problem, replace, replaced, separation, transfer, unit, wrong
    • Replies: 1
    • Views: 1,187
    big jase
    03-12-2010 Go to last post

  14. Error 26-4 on Konica 7145 while doing Auto Toner Supply

    Started by eurosears, 03-12-2010
    145, 7145, assembly, auto, back, cartridge, code, copier, copies, developer, dirty, error, error code, flipped, gears, konica, multiple, page, problems, side, slide, spinning, suppl, supply, switch, toner
    • Replies: 0
    • Views: 1,224
    eurosears
    03-12-2010 Go to last post

  15. Question bizhub 500 new code c-2804

    Started by salmoz, 03-10-2010
    280, 2804, 500, 804, abnormality, adjust, bizhub, bizhub 500, changing, code, density, email, gears, info, machine, pdf, sensor, sensors, showing, supply, tcr, toner, yahoo
    • Replies: 2
    • Views: 2,608
    dogsbody
    03-12-2010 Go to last post

  16. BizHub C450P vs. BizHub C352P

    Started by ExHvMedia, 03-08-2010
    belt, bizhub, bizhub c35, bizhub c352, black, black and white, buy, c352, color, covers, finisher, fuser, image, laser, paper, prices, print, problem, problems, quality, ros, sell, service, service manual, speed, tech, technology, toner, type
    • Replies: 3
    • Views: 1,155
    ck1
    03-12-2010 Go to last post

  17. Bizhub Pro c500 lines along pages

    Started by Albert, 02-06-2010
    bizhub pro c500, bubble color, c500, cases, change, changing, clean, color, developer unit, developers, exits, face up, feedback, fiery rgb, fuser unit, fusing unit, image, image quality, lef, lines, problem, quality, s300, side, unit, warped, white lines, yellow
    • Replies: 2
    • Views: 1,651
    Albert
    03-12-2010 Go to last post

  18. colorforce 8050 report code sc36-10

    Started by Alroy63, 03-10-2010
    8050, code, copier, dipsw, error, error code, fusing, mode, report, reset
    • Replies: 2
    • Views: 1,296
    Alroy63
    03-10-2010 Go to last post

  19. KM 7210 Scan to FTP Issues....

    Started by 300EVIL, 03-10-2010
    210, 310, 3102, 7210, 7272, button, controller, copier, data, fiery, ftp, ftp server, machine, message, network, print, roller, scan, scanning, screen, server, set, settings, time, work
    • Replies: 0
    • Views: 865
    300EVIL
    03-10-2010 Go to last post

  20. What is the difference between Konica TDS sensor 26NA88041 and 26NA88040

    Started by eurosears, 03-07-2010
    2 Pages •
    1 2
    804, alter, broken, change, damaged, developer unit, ect, find, good, info, konica, konica minolta, machines, message, minolta, part, replace, sensor, tds, unit, version, work
    • Replies: 11
    • Views: 2,867
    eurosears
    03-10-2010 Go to last post

Thread Display Options

Use this control to limit the display of threads to those newer than the specified time frame.

Allows you to choose the data by which the thread list will be sorted.

Order threads in...

Note: when sorting by date, 'descending order' will show the newest results first.

Icon Legend

Contains unread posts
Contains unread posts
Contains no unread posts
Contains no unread posts
More than 7 replies or 150 views
Hot thread with unread posts
More than 7 replies or 150 views
Hot thread with no unread posts
Closed Thread
Thread is closed
Thread Contains a Message Written By You
You have posted in this thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here