Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    TRON
    Guest

    KMC-3130, DF-625 Trouble

    Just throwing this out there. I have a DF-625 Finisher giving an error code of C0BA0, "Elevate mechanism malfunctions." I have done the troubleshooting mentioned in the manual and thought it was the PCB. I thought wrong. My next step is going to be the Tray motor (up/down) even though the tray is lifting to the upper limit sensor. Any suggestions?

  2. #2
    The Great Gazoo 250+ Posts kyoceradude's Avatar
    Join Date
    Aug 2006
    Location
    St. John, IN
    Posts
    442
    Rep Power
    36
    What kind of problem were you having b-4 this code, if any? Did anyone disassemble the cover on the exit side of finisher? If so, have you checked the sensor actuators to make sure they are not sticking? There's quite a few. Usually this problem occures when you turn on the copier without the exit tray attached to the finisher.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here