Results 1 to 5 of 5
  1. #1
    Technical 50+ Posts
    Join Date
    Oct 2007
    Posts
    61
    Rep Power
    26

    Kyocera FS2020Dn event log

    Hello,

    I need to print an Event Log.

    I've looked at the manual and it says:

    3. Turn printer power on. Make sure the printer is ready.
    4. Send the following PRESCRIBE command sequence from the PC to the printer.
    !R!KCFG"ELOG";EXIT;
    Note: To send a PRESCRIBE command sequence to the printer, use COMMAND
    CENTER (the printer's embedded web) while the printer is connected to the PC via its
    network interface.
    A sheet of event log will be printed.


    I cannot see an area on the Command center where to enter the coded command.
    Also, I looked at the IClink way and I'm a bit lost there too.


    Is there an easier way to do this?
    Help would be appreciated.

    Thanks

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Jul 2014
    Posts
    192
    Rep Power
    14

    Re: Kyocera FS2020Dn event log

    If your printer is networked (or you're able to direct connect via ethernet) you can ftp connect to the printer and PUT a plaintext .txt with the PRESCRIBE command as its body. This is possible through the windows command prompt. No ftp client required.

    You can also use the KX driver to append the .txt file to the beginning or end of a print job. Do this by going to the KX driver and clicking the 'Advanced' tab. Then click 'Prologue/Epilogue' and from here you can attach your PRESCRIBE .txt.

  3. #3
    Technical 50+ Posts
    Join Date
    Oct 2007
    Posts
    61
    Rep Power
    26

    Re: Kyocera FS2020Dn event log

    Thank you for your reply.
    I'll give it a go and let you know.

  4. #4
    Senior Tech 250+ Posts
    Kyocera FS2020Dn event log

    terramobil's Avatar
    Join Date
    Nov 2009
    Location
    Düsseldorf/Germany
    Posts
    434
    Rep Power
    27

    Re: Kyocera FS2020Dn event log

    Eventlog.txt

    Store the attached file on an usb key, insert key in machine and print it.
    If this does not work, rename file to eventlog.capt and try again.

  5. #5
    Senior Tech 250+ Posts
    Join Date
    Dec 2013
    Posts
    372
    Rep Power
    17

    Re: Kyocera FS2020Dn event log

    If you just need to view the event log, it's rather easy. Just type http://IPaddress/eventlog in any browser.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here