my ecosys m2035dn is displaying error cf010
my ecosys m2035dn is displaying error cf010
F010 Control PWB
Checksum error
Control PWB Unplug the power cord from the wall outlet, and wait five seconds. then turn on the power switch.
If not corrected, replace the control PWB and check operation.
All CFxxx codes fit in two categories:
1) a firmware or communication error between boards
2) a print data error
If you disconnect the network cable and can successfully boot up and copy, it's probably a print data error.
If you disconnect the network cable and it still does not boot without error, it's probably a firmware error or communication error.
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks