Page 1 of 3 123 LastLast
Results 1 to 10 of 26
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Sep 2015
    Posts
    63
    Rep Power
    21

    kyocera CS3011I 0501 jam error HELP

    Hello All. having a head thumper here and its probably something stupid.
    machine has 223480 pgs

    have a client with a Kyocera CS3011I that is giving a 0501 error. which is "No paper feed from cassette 1. The registration sensor (RS) does not turn on during paper feed from cassette 1 only " cassette 2 works flawlessly.

    1) have replaced all feed and sep rollers for both cassettes. didnt help but was needed.
    2) swapped PARTS PRIMARY FEED ASSY SP between tray 1 and 2 didnt help.
    3) swapped cassettes with each other. no help.
    4) change paper orientation letter vs letter R. no help
    5) side note needed new fuser due to lines. replaced that. no help on jam
    6) flash firmware with newest 2 times. no help.?
    7) call Kyo support no real help but suggested drive unit for cassette. so replace dr8315d and dr7105 ( drive units for tray 1 and 2) no help
    8) side note lift motor does turn and stop seemingly at appropriate times.
    9) call support again. said engine board. so replace that. no help.
    10) it will work sometimes intermittently, ran 50 copies worked great open and close cassette stopped working.
    full cassette or semi empty same issues.
    customer is using machine flawlessly with mp tray and cassette 2 but needs tray 1

    thoughts on what did I not think of? thanks

  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Oct 2012
    Posts
    653
    Rep Power
    35

    Re: kyocera CS3011I 0501 jam error HELP

    There is a hump on the rail that lifts the tray slightly when the tray is pushed it. I bet the hump is worn or deformed.

  3. #3
    Master Of The Obvious 10,000+ Posts
    kyocera CS3011I 0501 jam error HELP

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: kyocera CS3011I 0501 jam error HELP

    Nice presentation! You'll get rep points for that!

    Let us know how it goes. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Sep 2015
    Posts
    63
    Rep Power
    21

    Re: kyocera CS3011I 0501 jam error HELP

    is part 16 the one you are suggesting.

    they do open and close cassette 1 many times a day
    Attached Files Attached Files

  5. #5
    Field Supervisor 500+ Posts
    kyocera CS3011I 0501 jam error HELP


    Join Date
    May 2009
    Location
    Concord, NH
    Posts
    770
    Rep Power
    53

    Re: kyocera CS3011I 0501 jam error HELP

    Per chance did you ever find a sheet of paper behind the cassette? Have had this before where a sheet of paper got behind the cassette and when the user inserted the cassette it was between the cassette and the connectors on the tray and the backside of the machine and pushed paper shards into the connector preventing proper contact. Power down the unit and use a fine tipped spring hook [I actually have a fine tipped dental tool] to pick out the paper shards in the connector. Hope this helps.

  6. #6
    Trusted Tech 50+ Posts
    Join Date
    Sep 2015
    Posts
    63
    Rep Power
    21

    Re: kyocera CS3011I 0501 jam error HELP

    I know that jam issue and seen it on other machines. but havent found it on this machine and all cassettes look clean on the back and in the machine cavity<br>

  7. #7
    Owner/Service Manager 1,000+ Posts
    kyocera CS3011I 0501 jam error HELP

    tmaged's Avatar
    Join Date
    Oct 2008
    Location
    Center of my Universe
    Posts
    1,759
    Rep Power
    60

    Re: kyocera CS3011I 0501 jam error HELP

    The front two nylon rollers that support the cassette get worn out, so the height of the cassette is incorrect. The new ones are sintered. There should be a bulletin regarding it, but it never mentions the jamming issue. We have seen it.
    Hope that helps !
    -Tony


    www.dtios.com
    Become a fan on Facebook

  8. #8
    Trusted Tech 50+ Posts
    Join Date
    Sep 2015
    Posts
    63
    Rep Power
    21

    Re: kyocera CS3011I 0501 jam error HELP

    tmaged woulnt swaping the 2 cassettes with each other solve that or move it to the other location?

  9. #9
    Service Manager 1,000+ Posts
    kyocera CS3011I 0501 jam error HELP


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: kyocera CS3011I 0501 jam error HELP

    The white nylon rollers used to be mounted to the rails inside the machine. Literally with a screw through their center. Sometimes the screw would backout and go missing. Sometimes rollers would get damaged.

    But I think newer machines have these rollers on cassette. Could be wrong

  10. #10
    Trusted Tech 50+ Posts
    Join Date
    Sep 2015
    Posts
    63
    Rep Power
    21

    Re: kyocera CS3011I 0501 jam error HELP

    i think if I remember correctly this one is like cheap desk drawers. one roller on front of machine and one on back of cassette. not like the nicer machines with the slide rails that are a mild pain to remove the cassette.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here