Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Technician
    Join Date
    Jul 2018
    Posts
    19
    Rep Power
    3

    Kyocera P3055 Shifting Alignment Tray 2

    Hello,

    I have a customer printing on labels and the alignment is a little off. Numbers and names are cut off on the labels as they peel it. Labels are in tray 2.

    I know HP printers has a setting where you can adjust alignment on the X & Y axis. Does this Kyocera model have something similar?

  2. #2
    Service Manager 5,000+ Posts
    Kyocera P3055 Shifting Alignment Tray 2

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    5,420
    Rep Power
    97

    Re: Kyocera P3055 Shifting Alignment Tray 2

    Quote Originally Posted by wertyxhts View Post
    Hello,

    I have a customer printing on labels and the alignment is a little off. Numbers and names are cut off on the labels as they peel it. Labels are in tray 2.

    I know HP printers has a setting where you can adjust alignment on the X & Y axis. Does this Kyocera model have something similar?
    are you sure they have defined the PROPER size/type labels? have they tried printing a sample on PLAIN paper then backing it up to the label stock to see if it will align properly?

    I would imagine any X-Y axis adjusts could be made thru the print driver.

  3. #3
    Technician JPazy's Avatar
    Join Date
    Jul 2019
    Location
    Buffalo, NY
    Posts
    30
    Rep Power
    1

    Re: Kyocera P3055 Shifting Alignment Tray 2

    Like Phil said, might be something with the media, maybe try printing the labels from MFP Tray? There is an adjustment for registration (lead and side), but it is prescribe commands sent through IC Link. see page 2.4.11 in the service manual.

  4. #4
    Service Manager 5,000+ Posts
    Kyocera P3055 Shifting Alignment Tray 2

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    5,420
    Rep Power
    97

    Re: Kyocera P3055 Shifting Alignment Tray 2

    Quote Originally Posted by JPazy View Post
    "Like Phil said, might be something with the media, maybe try printing the labels from MFP Tray? ......."

    good catch on the tray 2 .. completely missed it.

    I don't know of ANY product that feeds labels CORRECTLY from any tray BUT the MPT. YES.. it may work that way for a while.. but MPT is preferred.

    please check the suggested media for the machines and which tray they suggest labels to be fed from... are you setting fuser to a heavier media setting ( slowing feed speed - boosting temp)?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here