taskalfa 300i

[kashif]

kyocera taskalfa 300i is giving error code F335, can someone helpout

[Phil B.]

kyocera taskalfa 300i is giving error code F335, can someone helpout

that would be in the service manual

what have you done to fix?

[JPazy]

i don't think older machines have many F codes explained in the manual. Sounds familiar to a code i had once on a KM-3060 in which the ADF cable had gotten damaged and had to be replaced. You may want to check the connection of the cable between the ADF and machine.

[bsm2]

Try updating the print driver should be kx driver set to pcl5
or you can change the PDL to KDPL

[jper34]

Try updating the print driver should be kx driver set to pcl5
or you can change the PDL to KDPL

you can try service mode #930,execute,,see if that works..just a shot in the dark..good luck,
le use know what you find..
Jaime