Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Junior Member M.Lerche's Avatar
    Join Date
    Nov 2019
    Location
    Weißwasser
    Posts
    6
    Rep Power
    0

    TA-2552ci-3253ci Induction scooters are worn very quickly

    TA-2552ci-3253ci Induction scooters are worn very quickly
    Are there alternative scooters from another manufacturer that fit here?
    has anyone ever tried this copier?[/COLOR]
    After about 30000 to 60000 we have to drive to the customer to change the feed rollers.
    Greetings from Germany

  2. #2
    Master Of The Obvious 10,000+ Posts
    TA-2552ci-3253ci Induction scooters are worn very quickly

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: TA-2552ci-3253ci Induction scooters are worn very quickly

    Is it safe to say that induction scooters are feed rollers? Your translation software missed the mark by a little.

    The pickup roller is smaller than the others. I don't have a substitute for that one. But you can substitute A00J 5636 00 Konica Minolta rollers for the feed and separation. They last a lot longer, but you do have to swap the hubs. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Service Manager 5,000+ Posts
    TA-2552ci-3253ci Induction scooters are worn very quickly

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: TA-2552ci-3253ci Induction scooters are worn very quickly

    Quote Originally Posted by M.Lerche View Post
    TA-2552ci-3253ci Induction scooters are worn very quickly
    Are there alternative scooters from another manufacturer that fit here?
    has anyone ever tried this copier?[/COLOR]
    After about 30000 to 60000 we have to drive to the customer to change the feed rollers.
    Greetings from Germany

    What type/weight of media is the customer using?

    Cheap recycled paper can cause the rollers to wear out prematurely.
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  4. #4
    Junior Member M.Lerche's Avatar
    Join Date
    Nov 2019
    Location
    Weißwasser
    Posts
    6
    Rep Power
    0

    Re: TA-2552ci-3253ci Induction scooters are worn very quickly

    I have these roles there.
    I've already tried that, but the roll is 2 millimeters too wide and can only be reduced badly. Have you ever tested these roles?
    We take these scooters for TA 3010i and 2551ci because it works very well.
    The customer does not use recycled paper.
    Regards M.Lerche

  5. #5
    Service Tech / IT Rep 100+ Posts JVergin's Avatar
    Join Date
    Jan 2009
    Location
    Nebraska
    Posts
    216
    Rep Power
    34

    Re: TA-2552ci-3253ci Induction scooters are worn very quickly

    I've had a few places (only on tray 3) where after 30k or so, a flat spot shows up on the sep roller causing J0503 misfeeds. If I replace the rollers, or even swap the entire feed assembly, the same problem eventually pops up again. For me, the fix has been to move the sep roller spring tension 1 notch tighter (or stronger. However you look at it.) so there is more pressure.

  6. #6
    Master Of The Obvious 10,000+ Posts
    TA-2552ci-3253ci Induction scooters are worn very quickly

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: TA-2552ci-3253ci Induction scooters are worn very quickly

    What jam codes are you getting?

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  7. #7
    Junior Member M.Lerche's Avatar
    Join Date
    Nov 2019
    Location
    Weißwasser
    Posts
    6
    Rep Power
    0

    Post Re: TA-2552ci-3253ci Induction scooters are worn very quickly

    0501 and 0511 are the traffic jam code
    The retard roller are completely flat at one point and did not turn right
    Today I changed a roller after 17000 copies
    We will try the Minolta roller, we also build them at 2551.
    Many thanks to all who help me here
    best regards from Germany

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here