Dislikes: 0
Many thanks, the printer is working again! I checked the converyor hooks and found a broken hook at the rear side.
It was still snapping in, but it must have been the cause for a gap between transfer belt and roller. My spare-part-printer had also this hook broken (it was used to have a df too). As a temporarily fix i filled it up with expoxy putty and filed it back into its shape. U089 prints are fine now. So many thanks for your efforts, i really appriciate it!
THX for feedback!!
If you have further requests,
let us know.
regards
KYO_OEM
Good work! =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Thanks: 
Likes: 
Reply With Quote
Bookmarks