Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Junior Member
    Join Date
    Jan 2020
    Location
    MALIQ
    Posts
    3
    Rep Power
    0

    HI EVERYONE....I NEED YOUR HEPL FOR KYOCERA TASKALFA 3010i

    KYOCERA 3010i.1.jpgKYOCERA 3010i.2.jpg

    my coppy machine has 150000 coppy page its brand new, and i have this problem below in the photo with this dots...

    what i can do, what i can change ?

    thnx

  2. #2
    Field Supervisor 500+ Posts Luther's Avatar
    Join Date
    May 2006
    Location
    crystal lake ,Illinois
    Posts
    640
    Rep Power
    35

    Re: HI EVERYONE....I NEED YOUR HEPL FOR KYOCERA TASKALFA 3010i

    clean or replace the charge roller

  3. #3
    Junior Member
    Join Date
    Jan 2020
    Location
    MALIQ
    Posts
    3
    Rep Power
    0

    Re: HI EVERYONE....I NEED YOUR HEPL FOR KYOCERA TASKALFA 3010i


  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Aug 2011
    Posts
    75
    Rep Power
    18

    Re: HI EVERYONE....I NEED YOUR HEPL FOR KYOCERA TASKALFA 3010i

    normally it must be MC.
    Please measure the distance between 2 dots.
    Repetive defects gauge.JPG

  5. #5
    Junior Member
    Join Date
    Jan 2020
    Location
    MALIQ
    Posts
    3
    Rep Power
    0

    Re: HI EVERYONE....I NEED YOUR HEPL FOR KYOCERA TASKALFA 3010i

    Quote Originally Posted by KYO_OEM View Post
    normally it must be MC.
    Please measure the distance between 2 dots.
    Repetive defects gauge.JPG
    horizontal 37.5mm

    vertikal 15mm83388048_208221573544222_1796086410436935680_n.jpg82767753_592377708210364_3207396098213675008_n.jpg

  6. #6
    Service Manager 5,000+ Posts
    HI EVERYONE....I NEED YOUR HEPL FOR KYOCERA TASKALFA 3010i

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    6,550
    Rep Power
    127

    Re: HI EVERYONE....I NEED YOUR HEPL FOR KYOCERA TASKALFA 3010i

    no spacing from one dot (horz) to next dot

  7. #7
    Service Manager 1,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    1,502
    Rep Power
    66

    Re: HI EVERYONE....I NEED YOUR HEPL FOR KYOCERA TASKALFA 3010i

    37.5mm, it should be charge roller as Luther mentioned. Sometimes cleaning isn't sufficient you have to replace parts.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

  8. #8
    Senior Tech 100+ Posts
    Join Date
    Apr 2016
    Location
    astoria or
    Posts
    118
    Rep Power
    10

    Re: HI EVERYONE....I NEED YOUR HEPL FOR KYOCERA TASKALFA 3010i

    roll your fingers on the roller and usually you will feel bumps on it. The steel usually corrodes causing the issue

  9. #9
    Senior Tech 100+ Posts
    Join Date
    May 2012
    Posts
    204
    Rep Power
    0

    Re: HI EVERYONE....I NEED YOUR HEPL FOR KYOCERA TASKALFA 3010i

    I had a similar problem on a 3500i and it was the charge roller.

  10. #10
    Senior Tech 100+ Posts George J's Avatar
    Join Date
    Nov 2010
    Posts
    104
    Rep Power
    20

    Re: HI EVERYONE....I NEED YOUR HEPL FOR KYOCERA TASKALFA 3010i

    It's my experience that cleaning the mc roller on kyo printers doesn't last all that long. Replacing them is the best option and easy to do.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here