Copier will not allow prints. Default is set up for B&W Prints only but it is requesting Color Toner in order to allow them to print.
Copier will not allow prints. Default is set up for B&W Prints only but it is requesting Color Toner in order to allow them to print.
In the system settings you need to enable print in black and white when color toner is out. Its in your operator guide
Just install the color toner so it can calibrate. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Don`t forget the limitation for running in b/w mode.
You can`t run b/w only!
Pages allowed after color toner empty:
A4 systems:
Sirius 30 pages max.
Mebius = 50 pages max.
Perseus = 500 pages max.
A3 systems:
Jupiter I+II = 500 pages max.
Venus I+II = 500 pages max.
Iris I+II = 1000 pages max.
Mercury I,II+III = 1000 pages max.
Bookmarks