Dislikes: 0
This machine has 35K copies. They run alot of envelopes so I am just assuming the squeeks are coming from the fuser. Is this a common problem or do the black drum units have this issue also (I just replaced the drum a month or so ago for lines)... Thanks so much for any help !!!
There are people on here who know tons more than me, but every time we have a squeak it's usually the fuserOriginally Posted by Doug James
Sent from my SM-G930V using Tapatalk
I've had some luck with Uniflor 8172 on the fuser gear bores. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
car transmission fluid works good on the fusers. it can withstand the heat.
Thanks: 
Likes: 
Reply With Quote
Bookmarks