Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 30
Re: 7551ci 11x17 crease
Thanks to everyone for all the help and feedback.
A couple side notes;
Problem was happening with both trays 1&2 so I don't think the feed stations were an issue.
Firmware was up to date.
The reg buckle adjustment I made would only affect larger size paper being duplexed, so I shouldn't see any issues with 8.5x11, but could cause problems down the road with 11x17 with other repairs.
Replacing the conveying unit would probably have fixed my issue without needing buckle adjustments, but I didn't have a spare to test with.
-mntech
Last edited by mntech; 02-22-2020 at 04:07 AM.
Reason: Typo
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks