New Taskalfa scan smaller when viewd

[jmaister]

Have you tried printing as an image instead of using the Acrobat generted file? If you can print the file as an image and it prints OK, then the problem is not machine based but in the program used to generate the PDF file for sending to the print driver. Remember, a PDF file is nothing more than a JPG image!

Heya,

I didn't. I have removed client workstation as part of the problem in the troubleshooting process.
Theres no "print as image" if you print directly from usb/storage media option, having the usb stick plugged into the machine.

At the very least, the MFP on its own should reproduce within designed tolerance isolated and with zero connectivity.


*ok you lost me. It's the machine that generated the pdf, is it not? In this case I am using the MFP as the reader and writer. It's all on the machine.

If anyone has access to a new Taskalfa, please test yours and see if it exhibit same problem if possible, if you be so kind? Would like to know if this is wide spread or just isolated few units. Thx

[toddanderson]

The 3 series have a setting for "Full Scan", that may relate.
search the op guide for full scan

Heya,

I didn't. I have removed client workstation as part of the problem in the troubleshooting process.
Theres no "print as image" if you print directly from usb/storage media option, having the usb stick plugged into the machine.

At the very least, the MFP on its own should reproduce within designed tolerance isolated and with zero connectivity.


*ok you lost me. It's the machine that generated the pdf, is it not? In this case I am using the MFP as the reader and writer. It's all on the machine.

If anyone has access to a new Taskalfa, please test yours and see if it exhibit same problem if possible, if you be so kind? Would like to know if this is wide spread or just isolated few units. Thx

[jmaister]

The 3 series have a setting for "Full Scan", that may relate.
search the op guide for full scan

Iiiinttterestttting. Cudos my man.

The 2 series highspeed doesn't have this in the operation manual...

I have tried the border settings, it isn't the problem.



Has anyone tried before giving out tips? Is this what this forum has come to?



*used the same file in the usb stick, plugged into a competitor machine, the print comes out spot on aspect ratio, no reduction.