Dislikes: 0
Thanks for that valuable info Gentlemen.
Didn't do the Kit A thingy yet but in the meantime machine is asking for a new waste toner container though the one in the machine is only half full. Is this related to the aforementioned problems with the cleaning pipe auger?
How is the machine detecting a full waste toner container?
Hans
" Sent from my Intel 80286 using MS-DOS 2.0 "
There's a photointerrupter that shines light through the neck of the bottle. If your enduser dumps the bottle, the neck of the bottle will become dirty on the inside (and outside), and indicate a full bottle. The photointerrupter may get toner in it. You can brush out the openings in the photointerrupter. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Yea, these machines only have a 200k pm cycle, for the price it's not very efficient but I do like how easy they are to replace everything. I've never seen one go over by much though, usually barely makes it. Copy quality issues and the bearings in the fuser start making noise.
Posting Permissions
Thanks: 
Likes: 
Reply With Quote
Bookmarks