Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Aug 2015
    Location
    Alexandroupolis, evros
    Posts
    337
    Rep Power
    0

    taskalfa 3500i light image

    MAchine works fine for 2, 3 weeks and then light image. I execute U132 and it works fine for 2,3 weeks and then the same.
    I cleaned corona, optics with no result
    Machine is one of a load of second hand copiers (all counters under 200k copies) . Because i had a lot of toners from these machines not full i transfered toner from one cartridge to an other to fill it. Toner are genuin Can it be toner? Perhaps toner chips or something else?

  2. #2
    Trusted Tech 50+ Posts
    Join Date
    Jul 2010
    Location
    torino
    Posts
    58
    Rep Power
    0

    Re: taskalfa 3500i light image

    2-3 week but how many print?
    and tis not have corona but roller charge
    however try to change the toner with 1 new then the dv unit

  3. #3
    Senior Tech 250+ Posts
    taskalfa 3500i light image

    GIUBOSS's Avatar
    Join Date
    Jul 2013
    Location
    Roma
    Posts
    359
    Rep Power
    25

    Re: taskalfa 3500i light image

    Quote Originally Posted by Gab View Post
    MAchine works fine for 2, 3 weeks and then light image. I execute U132 and it works fine for 2,3 weeks and then the same.
    I cleaned corona, optics with no result
    Machine is one of a load of second hand copiers (all counters under 200k copies) . Because i had a lot of toners from these machines not full i transfered toner from one cartridge to an other to fill it. Toner are genuin Can it be toner? Perhaps toner chips or something else?
    the chip does not lighten the image ... Check on the surface of the drum if a good image is formed (cutting the print) then the problem is in the transfer unit. Sometimes a bearing in the ends is damaged.

  4. #4
    Service Manager 1,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    2,087
    Rep Power
    92

    Re: taskalfa 3500i light image

    Quote Originally Posted by avio2 View Post
    2-3 week but how many print?
    and tis not have corona but roller charge
    however try to change the toner with 1 new then the dv unit
    Quote Originally Posted by GIUBOSS View Post
    the chip does not lighten the image ... Check on the surface of the drum if a good image is formed (cutting the print) then the problem is in the transfer unit. Sometimes a bearing in the ends is damaged.
    Yeah basics troubleshooting, agree on with Italian fellow techs.

    Off topic:
    Italy keep fighting on 👍
    Our hearts and souls are with you.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here